IAE News You Can Use — Q4 2016
Change Language:
NH3 Early Order

Continental Globe and Angle Hose End Valves

Use with transfer hoses for both liquid and vapor service. A combination of Continental’s rugged ductile iron full flow globe or angle valves, female ACME extensions and A411 stainless steel bleeder valve. A215L is a high flow 1-¼ in. Valve assembly with 1-¾ in. Acme extension.

Part No. A215L

B-9500 Meter Matic

Designed large toolbars and high capacity NH3 output. It features a unique straight-bore flow with virtually no restriction, a rotary actuator, single dial setting calibrated in pounds N per hour, heat treated, durable, lightweight aluminum body universal mounting bracket (adaptable to most meter stands), available in 1 in. FPT or 1-¼ in. MPT inlet.

Part No. B9500

CDS-John Blue Impellicone Flow Divider

Distributes NH3 to multiple rows across an applicator with accuracy.

Part No. IP-1300
Part No. IP-0600

Equa-Flo Distribution Manifold

An adjustable orifice for NH3 distribution. It accommodates all equipment and application changes with accuracy. Inlet is 1" FPT. Port size is ¼ in. FPT.

Part No. 111665

Safety

NH3 Safety Goggles

Non-vented goggles with adjustable strap.

Part No. 2237R

NH3 Gloves

Part No. 120SG

Raven Radar Gun with Cable

Measures true ground speed under actual field conditions. ....................Part No. 117-0159-822

Raven/Dickey-john Interface Cable
Part No. 115-0159-526

Raven Wheel Drive Speed Sensor
Part No. 063-0159-484

Raven Extension Cables.
12' .................................. Part No. 115-0159-032
24' .................................. Part No. 115-0159-018

Dickey-john Radar Gun

Measures true ground speed under actual field conditions.

Part No. RSV2

TeeJet GPS Speed Sensor

Measure true ground speed, then delivers a frequency signal compatible with the radar speed signal input on most controls and monitors. For use with Raven console.

Part No. 90-02404

NH3 Nylon Braided Hoses

Assemblies with factory end. Used for nurse tanks. Black perforated wrapped neoprene cover with continuous green stripe, tube is neoprene with multiple textile braids.

EVA Tubing

For anhydrous ammonia, aqua ammonia, herbicides, phosphates and all liquid fertilizers.

GVM NH3 Wagons

• Comes completely assembled

• Heavy duty retractable tongue with greasable bushings

• Grease fittings on hubs and on 5th wheel plate

• 14,000 GVW capacity

• 1,000 or 1,450 gal. Tank

• 3.5 x 3.5 tube tongue

• 501349 inner bearing

• LM67048 outer bearing

• 2 in. Cold rolled spindle

• 2 in. Cold rolled king pin

• 1/2 X 16 in. Plated 5th wheel

• 6-on-6 hub

• 60 - 80 in. Adjustable track width

• Black powder coated finish

Mole Knives, Shanks, & Coulter Blades

Wako Mag 50 with Beavertail Sealer

1-½ x 2-½ in. 5160 springs steel. Easy pulling and long wearing.

Part No. MAG50/BTS

Wako Mag 40 with Beavertail Sealer

1/2 X 2-½ in. 5160 Spring Steel.

Excellent wear life, works well with rolling coulters, and in sodgrass application.

Part No. MAG40/BTS

Hi-Pro Manufacturing Mole Knife

Available with 1/2 In. Or ½ in. Tubes. Double tube or specialty tubes are available.

Part No. B33-38

Hi-Pro Manufacturing Side Dress Mole Knife Part No. B33SD38

Other Sizes Available

20 in. Fluted Coulter Blades

Made with chrome-boron steel, these coulter blades provides long wear life and resistance to breakage.

Part No. 2571-168

Toolbar Shanks

1 x 2 in. Flat “chisel” shank. Mounting hole is 13/16 in. This shank requires knife side-plate brackets.

Disc Sealers
Adjustable blade pitch for precise sealing bolts onto 1 x 2 in. And 1-¼ x 2 in. Flat shanks, 1-¼ in. Square-coil shanks and 2 in. Shanks. Available with a variety of blade options, including 12 in. Smooth, 13 1/2 In. Notched, 16 in. Smooth, and notched blades can be set to pinch slot closed or catches soil to cover slot. Spring-loaded to follow the soil surface for superior closing action.
VIEW ALL ARTICLES
Message
SEND