IAE News You Can Use Q4 2016 : Page 3

SAVE BIG ON NH3 PRODUCTS! Raven Accu-Flow Fast Valve System Description 440 console Console cable Flow cable 30 GPM AccuFlow Kit Part No. 063-0171-183 115-0171-085 115-0171-800 063-0172-386 Free freight on all NH3 orders through January 30, 2017* *Free freight does not apply to tanks, nurse trailers, or wagons. B-9500 Meter Matic Designed large toolbars and high capacity NH3 output. It features a unique straight-bore flow with virtually no restric-tion, a rotary actuator, single dial setting calibrated in pounds N per hour, heat treated, durable, lightweight aluminum body universal mounting bracket (adaptable to most meter stands), available in 1 in. FPT or 1-¼ in. MPT inlet. Part No. B9500 Continental Globe and Angle Hose End Valves Use with transfer hoses for both liquid and vapor service. A combination of Continental’s rugged ductile iron full flow globe or angle valves, female ACME extensions and A411 stainless steel bleeder valve. A215L is a high flow 1-¼ in. valve assembly with 1-¾ in. Acme extension. Part No. A215L Valves, Couplers, & Gauges Description Relief & Bleeder Valves ¾" Vapor relief valve 1-¼" Vapor relief valve ¼" Bleeder thumb valve ¼" Bleeder tee valve ¼" Hydrostatic relief valve Squibb Valves 1" Globe valve 1-¼" Globe valve 1-¼" Fill & vapor valve 1" Angle valve 1-¼" Angle valve Withdrawal valve w/ relief Pioneer Breakaway Couplers Part No. A1301A A1310A A1911 TSS3169 A1327 AL310P AL312P A1590P AL311P AL313P A1597R CDS-John Blue Impellicone Flow Divider Distributes NH3 to multiple rows across an applicator with accuracy. Part No. IP-1300 Part No. IP-0600 Equa-Flo Distribution Manifold An adjustable orifice for NH3 distribution. It accommodates all equipment and application changes with accuracy. Inlet is 1" FPT. Port size is ¼ in. FPT. Part No. 111665 Withdrawal valve with w/o relief A1598P 1" Female w/ bracket 4555-6 1-¼" Female w/ bracket 4555-7 1 x 1-¾" Complete 4500-6M 1-¼ x 1-¾" Complete 4500-7 O-ring, rebuild part Nylon retainer, rebuild part 1" MPT x 1-¾" ACME x 6" long 45-801-6 4158001 A1131F Safety NH3 Safety Goggles Non-vented goggles with adjustable strap. Part No. 2237R Safety Coupling NH3 Gloves 0-60 PSI 2-½" Gauge 0-160 PSI 2-½" Gauge 0-400 PSI 2-½" Gauge Top Sr. Gauge SS, 41" Top Sr. Gauge SS, 46" Top Gauge Sr., 41" Top Gauge Sr., 46" Top End Gauge, 41" ASG60 ASG160 ASG400 A6480-13 A6480-12 AA214ES AA240A AD140A Part No. 120SG Ammonia & Volume Gauges NH3 Decals Description NH3 decal curved 4" letters Valve ID decal DOT 1005 decal NH3 decal/green letters SMV  decal highly reflective Part No. 17-V-5A-GRN 17-V-8 7-V-1005 17-V5-GRN 2FP-CH www.IndependentAg.com | PA: 800.345.3546 | OH & IN: 800.848.8460 | NEWS YOU CAN USE | 3

NH3 Early Order

Continental Globe and Angle Hose End Valves

Use with transfer hoses for both liquid and vapor service. A combination of Continental’s rugged ductile iron full flow globe or angle valves, female ACME extensions and A411 stainless steel bleeder valve. A215L is a high flow 1-¼ in. Valve assembly with 1-¾ in. Acme extension.

Part No. A215L

B-9500 Meter Matic

Designed large toolbars and high capacity NH3 output. It features a unique straight-bore flow with virtually no restriction, a rotary actuator, single dial setting calibrated in pounds N per hour, heat treated, durable, lightweight aluminum body universal mounting bracket (adaptable to most meter stands), available in 1 in. FPT or 1-¼ in. MPT inlet.

Part No. B9500

CDS-John Blue Impellicone Flow Divider

Distributes NH3 to multiple rows across an applicator with accuracy.

Part No. IP-1300
Part No. IP-0600

Equa-Flo Distribution Manifold

An adjustable orifice for NH3 distribution. It accommodates all equipment and application changes with accuracy. Inlet is 1" FPT. Port size is ¼ in. FPT.

Part No. 111665

Safety

NH3 Safety Goggles

Non-vented goggles with adjustable strap.

Part No. 2237R

NH3 Gloves

Part No. 120SG

Raven Radar Gun with Cable

Measures true ground speed under actual field conditions. ....................Part No. 117-0159-822

Raven/Dickey-john Interface Cable
Part No. 115-0159-526

Raven Wheel Drive Speed Sensor
Part No. 063-0159-484

Raven Extension Cables.
12' .................................. Part No. 115-0159-032
24' .................................. Part No. 115-0159-018

Dickey-john Radar Gun

Measures true ground speed under actual field conditions.

Part No. RSV2

TeeJet GPS Speed Sensor

Measure true ground speed, then delivers a frequency signal compatible with the radar speed signal input on most controls and monitors. For use with Raven console.

Part No. 90-02404

NH3 Nylon Braided Hoses

Assemblies with factory end. Used for nurse tanks. Black perforated wrapped neoprene cover with continuous green stripe, tube is neoprene with multiple textile braids.

EVA Tubing

For anhydrous ammonia, aqua ammonia, herbicides, phosphates and all liquid fertilizers.

GVM NH3 Wagons

• Comes completely assembled

• Heavy duty retractable tongue with greasable bushings

• Grease fittings on hubs and on 5th wheel plate

• 14,000 GVW capacity

• 1,000 or 1,450 gal. Tank

• 3.5 x 3.5 tube tongue

• 501349 inner bearing

• LM67048 outer bearing

• 2 in. Cold rolled spindle

• 2 in. Cold rolled king pin

• 1/2 X 16 in. Plated 5th wheel

• 6-on-6 hub

• 60 - 80 in. Adjustable track width

• Black powder coated finish

Mole Knives, Shanks, & Coulter Blades

Wako Mag 50 with Beavertail Sealer

1-½ x 2-½ in. 5160 springs steel. Easy pulling and long wearing.

Part No. MAG50/BTS

Wako Mag 40 with Beavertail Sealer

1/2 X 2-½ in. 5160 Spring Steel.

Excellent wear life, works well with rolling coulters, and in sodgrass application.

Part No. MAG40/BTS

Hi-Pro Manufacturing Mole Knife

Available with 1/2 In. Or ½ in. Tubes. Double tube or specialty tubes are available.

Part No. B33-38

Hi-Pro Manufacturing Side Dress Mole Knife Part No. B33SD38

Other Sizes Available

20 in. Fluted Coulter Blades

Made with chrome-boron steel, these coulter blades provides long wear life and resistance to breakage.

Part No. 2571-168

Toolbar Shanks

1 x 2 in. Flat “chisel” shank. Mounting hole is 13/16 in. This shank requires knife side-plate brackets.

Disc Sealers
Adjustable blade pitch for precise sealing bolts onto 1 x 2 in. And 1-¼ x 2 in. Flat shanks, 1-¼ in. Square-coil shanks and 2 in. Shanks. Available with a variety of blade options, including 12 in. Smooth, 13 1/2 In. Notched, 16 in. Smooth, and notched blades can be set to pinch slot closed or catches soil to cover slot. Spring-loaded to follow the soil surface for superior closing action.

Read the full article at http://digital.graphcompubs.com/article/NH3+Early+Order/2673982/371861/article.html.

Previous Page  Next Page


Publication List
Using a screen reader? Click Here